The Cool Shield Floor GuardTM is a low-cost yet highly effective approach to sealing cable cut-outs and other openings in raised floors. Cable cut-outs in raised floor are almost always in areas where it is unproductive to provide cooling. The process of sealing these holes can prevent wasting thousands of dollars in energy costs. Consider a typical 5000 square foot data center with 80 unsealed cable openings. The air loss from those openings is equivalent to the capacity of a 50-ton cooling unit.

Floor Guard is highly fire resistant, durable and easy to install. It can be easily cut to cover nearly any size opening. Two simple cuts in the material allow it to be applied around existing cables in the opening. The rubberized material forms an excellent seal around the cables to prevent air leakage.

The non-slip rubberized vinyl foam is nearly impossible to tear but can be easily cut to size with a utility knife. The foam is mechanically bonded to a polymeric film barrier. The film acts as a barrier, preventing plasticizer migration from interfering with the adhesive and helping it to maintain a long- term bond to many types of substrates.

Go to www.cool-shield.com for even more information on the most versatile aisle containment solution available.

FloorGuard

The Cool Shield Floor GuardTM is a low-cost yet highly effective approach to sealing cable cut-outs and other openings in raised floors. Cable cut-outs in raised floor are almost always in areas where it is unproductive to provide cooling. The process of sealing these holes can prevent wasting thousands of dollars in energy costs. Consider a typical 5000 square foot data center with 80 unsealed cable openings. The air loss from those openings is equivalent to the capacity of a 50-ton cooling unit.

Floor Guard is highly fire resistant, durable and easy to install. It can be easily cut to cover nearly any size opening. Two simple cuts in the material allow it to be applied around existing cables in the opening. The rubberized material forms an excellent seal around the cables to prevent air leakage.

The non-slip rubberized vinyl foam is nearly impossible to tear but can be easily cut to size with a utility knife. The foam is mechanically bonded to a polymeric film barrier. The film acts as a barrier, preventing plasticizer migration from interfering with the adhesive and helping it to maintain a long- term bond to many types of substrates.

Go to www.cool-shield.com for even more information on the most versatile aisle containment solution available.

Request a Quote
Features
  • Durable rubberized vinyl construction
  • Permanent synthetic adhesive
  • Black, pebbled texture
  • FM VSS 302 Flammability Rating
Specifications
  • Protects cables from tile edges
  • Covers all cut-out size and shapes
  • Will not fall into subfloor or lose brushes
  • Installs in less than 1 minute with no drilling
Cool Shield Floor Guard Models
Part #DescriptionDimensions 
Cool Shield Floor Guard – 5″ Circular Cover
Seals openings up to 3″ in circumference
(Sold by the Carton of 30)
MSRP: $9.99 (Per Unit)   DCR Price: $7.99 (Per Unit)
5″ x 5″ x .2″
Cool Shield Floor Guard – 8″ x 9″ Cover
Seals openings up to 6″ x 7″
(Sold by the Carton of 20)
MSRP: $19.99 (Per Unit)  DCR Price: $15.99 (Per Unit)
8″ x 9″ x .2″
Cool Shield Floor Guard 11″ x 12″ Cover
Seals openings up to 9″ x 10″
(Sold by the Carton of 20)
MSRP: $24.99 (Per Unit)    DCR Price: $17.99 (Per Unit)
11″ x 12″ x .2″
   
Solution Request

    Name (required)

    Email Address (required)

    Phone Number

    Notes/Questions

    Accessories
      Similar Products
      arrow